---
title: "Polyurethane shaft coating"
description: "Modern manufacturing is persistently looking for alternative solutions that can extend the life of equipment and reduce costs. Plant Timol for many years"
lang: "en"
date: "2020-06-01"
canonical_url: "https://timol.com.ua/en/statti/pokrytie-valov-poliuretanom"
---
# Polyurethane shaft coating

Modern manufacturing is persistently looking for alternative solutions that can extend the life of equipment and reduce costs. Plant Timol for many years engaged in the manufacture of components made of innovative materials and offers the customers with the old capacity to produce a coating of shafts with polyurethane.

What feature of the services, including our product will reduce your cost and improve the work, read the article.

## Instead of metal and rubber

Polyurethane shafts are used in practically all spheres of the economy, with success replacing a similar thing of rubber and metal.

The secret of the surge of interest in the business to this material due to its properties. Products can withstand very heavy loads, have a long lifetime without any loss of quality. They are suitable for heavy and light industry, medicine, food production, agriculture, construction, etc.

**PU parts:**

- behave the same at high and low temperatures (even in the range from -50 to +60°C);
- work gently, without creating sharp noise and annoying rattle;
- on the surface does not stick dirt, dust and other debris;
- take the rough with;
- defy ultraviolet light;
- do not deform in an aggressive environment (oils, gasoline, salt water, etc.);
- do not leave marks on the surface.

On the shafts will not have mold, micro-organisms can't make their colonies there. They do not pass electricity, and their elasticity is legends.

## What shafts to order

The catalog of our Internet shop will be able to enjoy the finished product: finishing shafts, pulling or transport. You can use them for staining or painting wood products, the application of the adhesive on the paper products, dyeing woven materials, laminating and smoothing.

Well established our products in the production of leather, metal and chemical sectors. Here the shafts are made from polyurethane used for pulling, pushing, and pulling.

Can offer your own version. The order of any complexity. Terms of cooperation it is necessary to discuss with the representative of customer support service by phone or submitting a request for a call back.

Although the source material has no color, buy polyurethane shaft can be in bright colors. This is achieved by adding a dye. It is non-toxic, so the equipment is safe, and the paint won't stick on your products. But this shaft will give a production outfit a bit of style, your employees will be more likely to smile.

### Why shafts lining

Lining (comes from the German word Futter - lining) is an operation to protect the metal parts of the mechanism with a special compound. Often for these purposes use the polyurethane.

Our company provides a full cycle of works on the lining of shafts with polyurethane. The coating of this composite material can be produced on the new equipment to protect it from damage, abrasion, quick wear. Good results are obtained with the refractory lining when applied to already damaged part of the mechanism, and is much cheaper than replacement with new equipment.

Yes, and the process goes much faster, which helps to avoid long periods of inactivity.

The coating is also reliable as it is made from polyurethane, the shaft, its rigidity can be adjusted for a specific order. As the whole detail, the deposited layer has a high strength: not destroyed under the action of bending forces. The coefficient of friction is low, so it does not require additional lubrication. A polyurethane high elasticity. Check the gap give a very good result, reaching up to 650%.

Received a second life, shafts will work without interruption, keeping the working surface is practically in perfect condition.

If necessary, carry out work at the facility, the cost is calculated individually.

## Your benefits from cooperation with Thymol

The main advantage is working directly with the manufacturer. No middlemen, no extra markups on bid.

Since the plant is located in the river, no need to pay import duties. Delivery is provided in any region in the most convenient way for the customer.

The company operates a flexible system of discounts and promotions: you always have the chance to buy goods on more favorable terms.

At all stages of production clearly monitor the implementation of the technology. Work with high-quality material from global suppliers. We work with firms of France, Italy, Germany, UK, order source material in Australia.

Always open to long-term cooperation with interested entrepreneurs of Ukraine and abroad.