---
title: "Polyurethane wheel coating"
description: "In machinery and equipment, the wheels suffer the most load, which leads to frequent breakage, rapid wear. Plant Timol offers a simple and affordable way"
lang: "en"
date: "2020-06-01"
canonical_url: "https://timol.com.ua/en/statti/pokrytie-koles-poliuretanom"
---
# Polyurethane wheel coating

In machinery and equipment, the wheels suffer the most load, which leads to frequent breakage, rapid wear. Plant Timol offers a simple and affordable way to cope with the problem - covering of wheels with polyurethane.

As it happens, what to hold promise, how much it costs, will learn after reading this article.

## Why polyurethane is better than rubber

If you prefer time-tested rubber, try the new material will become a definite fan. The raw materials great opportunities and a very long service life.

The advantages of the wheels of polyurethane should look more closely:

- able to withstand very heavy loads (up to 7 000 kg per wheel);
- unlike rubber counterparts do not require paging;
  with the same "patience" to tolerate extremista temperature (-50° C) and super high (+60 to +100°C);
- great move on any surfaces (sand, concrete, tiles, asphalt, etc.) and not leave residue;
- continues moving on the small sharp stones or metal scraps, shavings. Rubber will inevitably get "trauma";
- in case of damage to the upper layer, the recovery of the polyurethane wheels will not entail large financial and time costs.

Polyurethane coating is well kept on the metal rim, not far behind. The wheels covered with polyurethane, there is no roll during the movement of goods or rise. They are not afraid of mold and corrosion. Endure exposure to acids, gasoline, industrial oils. Stand stay in sea water.

Thus products made of polyurethane do not contain harmful components do not pollute the environment, do not cause allergic reactions. Therefore, the material finds wide application in the food industry, the manufacture of furniture and textiles.

### A new wheel or liner

Implements plant "Thymol" wheels ready of different sizes of polyurethane and polyurethane foam. It is made of foam materials, covered with a layer of soft polyurethane. These models have a corrugated surface, so they have a high permeability. Due to the foam core, they are lighter weight.

You can buy products of different colors: yellow, red and others - trade will not look so dull.

So it was the right choice, when buying, consider how and where it will be operated by the mechanism which load he was destined to endure. And don't forget the main rule: perform periodically inspection of the wheels, remove immediately adhering dirt, then they will pay you a long and dedicated work.

You can go the other way: to order a lining of polyurethane wheels.

The treatment process is as follows: the mixture is airless method. For the hardening layer there is no need to apply heat. The result is a smooth surface without seams. After the wheel liner has all the qualities of cast products.

This treatment can be used in different industries. Technology suitable for storage arrangements, material handling equipment, handling equipment, etc.

The advantage of the lining that:

- is inexpensive;
- significantly reduced equipment downtime;
- reliably protects the metal base from damage.The procedure can be repeated several times, prolonging the service life of the wheel. For minor "injuries" possible surgical repair.

The method has wide application and is suitable to protect other parts: shafts, rollers, buckets, etc.

### Use the material of the European level

The Timol raw materials comes from European countries (Germany, England, Italy) and Australia. The product is high quality and meets international standards and requirements of the legislation of Ukraine.

This is our twofold polyurethane no specific chemical smell. The material is not prone to breaking and abrasion. Products do not threaten the plantations of bacteria and mold.

On customer request we produce product with desired color, make the dye in the composition for coating with polyurethane wheels. The dyes are harmless, do not fade the entire period of use of the products, do not leave marks on surfaces.

## The advantages of orders from Thymol

The plant is located in the Dnieper. It is a large transport center with an extensive system of transportation. So is able to provide prompt shipment of orders of any volume.

You can buy ready-made products, but workable and original design customers.

Work with the manufacturer - guarantee reasonable prices and flexible discounts allowing you to purchase goods on more favorable terms.

If individual consultation is required on all the detailed points will be answered by the representative from customer service. Can be contacted by phone or filling out the online feedback form.