---
title: "Physical and Mechanical Properties of Different Types of Polyurethane: Comparison and Selection"
description: "Detailed review of the physical and mechanical properties of polyurethane of various hardness levels. Comparison with rubber, steel, and caprolon. Technical consultation from TIMOL."
lang: "en"
date: "2026-11-17"
canonical_url: "https://timol.com.ua/en/statti/fiziko-mekhanichni-pokaznyky-ryznykh-typiv-poliuretanu"
---
# Physical and Mechanical Properties of Different Types of Polyurethane: Comparison and Selection

A screen assembly or concrete mixer scraper that wears out within weeks is a familiar problem for many mechanics and technologists. Replacement rubber or steel parts often cannot withstand abrasives, impact loads, or low temperatures, leading to downtime and additional maintenance costs. TIMOL's cast polyurethane radically changes the lifespan of components by combining wear resistance, elasticity, and temperature stability. In this article, we examine the physical and mechanical properties of different types of polyurethane, explain how to select hardness and design, and compare polyurethanes with other industrial materials.

## What Physical and Mechanical Properties Define Polyurethane for Industry?
Polyurethane is an elastomer that combines high strength, a wide range of hardness, and stability of properties over a wide temperature range. For industrial parts, the following characteristics are critically important: wear resistance 10 times higher than rubber, operating temperature from -60 to +100 °C, hardness from 50 Shore A to 70 Shore D, tensile strength 25-60 MPa, rebound elasticity 35-65%, density 1.05-1.25 g/cm3. Thanks to these properties, polyurethane is used in 12 industries, from mining to mechanical engineering and the food industry.

In industrial assemblies, polyurethane parts work under abrasion, impact, deformation, and cyclic loading. For example, linings for gravity equipment or screen assemblies constantly contact abrasives, while wheels and rollers in mechanical engineering face dynamic loads and vibrations. Free casting of polyurethane allows for the creation of products of any shape and size, precisely according to customer drawings, with optimal properties for a specific assembly.

## How Does Polyurethane Hardness Affect Performance Properties?
The hardness of polyurethane is a parameter that directly determines its behavior under load. For abrasive and wear-resistant parts, such as screens, linings, and scrapers, the optimal range is 80-95 Shore A. The elasticity in this zone allows the material to absorb abrasive impacts: the particle does not cut into the surface but bounces off without leaving a deep groove. Increased rigidity (Shore D) in such parts, on the contrary, leads to chipping and faster destruction.

For seals, gaskets, and packings (e.g., in pipe rolling production or transport assemblies), polyurethanes with a hardness of 70-90 Shore A are used. This provides an optimal balance between elasticity and pressure resistance. Structural parts that must retain their shape under static load (guides, supports) are made from hard polyurethane up to 70 Shore D. The choice of hardness always depends on the specific task and operating conditions, considering the type of load, presence of abrasives, temperature, and requirements for geometry recovery after deformation.

> **Engineer’s Tip:** For assemblies working in contact with abrasives (screens, linings, scrapers), choose polyurethane 85-95 Shore A. This hardness allows the material to deflect particles rather than crumble, ensuring maximum lifespan. Excessively rigid grades (Shore D) lack this advantage and quickly chip on abrasives.

## How Does Polyurethane Wear Resistance Compare to Rubber, Steel, and Plastics?
TIMOL polyurethane has wear resistance 10 times higher than rubber, as confirmed by DIN 53516 tests. Polyurethane abrasion is 20-45 mm3, while SBR rubber is 100-200 mm3, NBR is 80-150 mm3, and EPDM is 80-180 mm3. Compared to caprolon (30-90 mm3), polyurethane also excels, especially in assemblies with impact and cyclic loading. Steel does not formally have a DIN 53516 standard but fails differently, through chipping, edge erosion, and cracking, especially in areas of abrupt cross-section changes.

For mining, metallurgical, and pipe rolling equipment assemblies, where the main type of wear is abrasive or impact, polyurethane provides minimal wear and significantly longer service life than rubber or caprolon counterparts. This is particularly important for screens, scrapers, linings, wheels, rollers, and guides. Unlike rigid plastics, polyurethane does not crack from local impact but elastically restores its shape, reducing the risk of catastrophic part failure.

## Comparative Table of Physical and Mechanical Characteristics

| Material | Abrasion DIN 53516, mm3 | Hardness | Tensile Strength, MPa | Operating Temperature, °C | Density, g/cm3 | Rebound Elasticity, % |
|---------------------------|------------------------|---------------------|------------------------|----------------------------|------------------|-------------------------|
| Polyurethane (TIMOL) | 20-45 | 50A - 70D | 25-60 | -60...+100 | 1.05-1.25 | 35-65 |
| SBR Rubber | 100-200 | 40A - 80A | 8-20 | -40...80 | 0.94-1.1 | 30-55 |
| NBR Rubber | 80-150 | 40A - 90A | 10-25 | -30...100 | 1-1.3 | 20-45 |
| EPDM Rubber | 80-180 | 30A - 90A | 7-20 | -50...120 | 0.86-1.1 | 25-50 |
| Natural Rubber (NR) | 60-130 | 30A - 80A | 20-30 | -50...70 | 0.92-1 | 40-75 |
| Caprolon (PA6/66) | 30-90 | 75D - 85D | 60-85 | -40...100 | 1.13-1.15 | 5-15 |
| Structural Steel (St3, 45) |, | 120-250 HB | 370-700 | -40...500 | 7.7-7.9 |, |
| Stainless Steel (AISI 304/316)|, | 170-220 HB | 500-700 | -200...800 | 7.9-8 |, |
| Hardox 400/500 |, | 370-540 HB | 1250-1600 | -40...250 | 7.8-7.85 |, |

The table illustrates how advantageous polyurethane is for tasks where abrasion and flexibility in hardness selection are crucial. For assemblies with dynamic loading, this is often a key selection criterion. TIMOL's catalog offers parts for each of the 12 industries, with recommended hardness and product type ([see more in the polyurethane product catalog](/katalog)).

## What Determines the Strength and Durability of Polyurethane Parts?
The tensile strength of polyurethane is 25-60 MPa, allowing the material to withstand significant static and dynamic loads, deformations, and impacts. For bushings, rods, wheels, and rollers, this ensures stable operation even under high sudden loads or vibrations. Unlike rigid plastics, polyurethane is not brittle upon impact but restores its shape without cracking.

The durability of polyurethane parts is determined not only by absolute strength but also by the material's ability to dissipate local stresses. This is why in assemblies with intense friction, such as scrapers, screens, and linings, the service life of polyurethane significantly exceeds that of similar rubber or plastic parts. It is also important to properly prepare the surface for adhesion when casting linings or manufacturing complex-shaped parts, ensuring reliable operation throughout the entire service cycle.

## What Is the Operating Temperature of Polyurethane Compared to Competitors?
The operating temperature range of TIMOL polyurethane, from -60 to +100 °C, covers the requirements of most industrial assemblies. This gives an advantage over SBR rubber (-40...80 °C) or natural rubber (-50...70 °C), as well as compared to caprolon (-40...100 °C). At low temperatures, polyurethane retains elasticity, does not crumble, and maintains its ability to absorb impacts. Unlike steel or plastic parts, polyurethane does not become rigid at sub-zero temperatures and does not become brittle.

In mining, metallurgy, oil and gas industries, and railway transport, assemblies often operate outdoors or in unheated workshops. Here, polyurethane demonstrates stable performance, for example, in gravity equipment, bucket elevators, or scrapers for belt conveyors. For special assemblies with increased temperature or contact with aggressive environments, it is advisable to select the type of polyurethane individually, with consultation from the plant technologist.

## Where Are Different Types of Polyurethane Used by Hardness and Properties?
The choice of polyurethane type is made for a specific task: for screens, linings, scrapers in the mining and metallurgical industries, optimal grades are 80-95 Shore A. This provides maximum resistance to abrasion and impact. For seals, gaskets, packings in pipe rolling production or railway transport, 70-90 Shore A is suitable. Wheels, rollers, and guides for mechanical and automotive engineering are made from hard polyurethane (90-98 Shore A or 50-60 Shore D), ensuring resistance to deformation and loads.

The application range of polyurethane products is wide: from screen parts, concrete mixer scrapers to guides, bushings, rings, polyurethane sheets, and plates. TIMOL factory products are also used in the food, printing, pulp and paper, agricultural, and light industries. For each industry, there are typical solutions adapted to operating conditions, from thickness and hardness to color and type of mixture. A full list is available in the [polyurethane product catalog](/katalog).

## How to Choose Polyurethane and Order a Part with Required Properties?
Polyurethane products are manufactured by the free casting method, ensuring precise reproduction of any geometry, including complex shapes, according to customer drawings or samples. To order a part, simply provide a drawing, template, or sample. TIMOL engineers will select the optimal type of polyurethane based on hardness, thickness, and chemical resistance, considering the specifics of the assembly (abrasives, temperature, load, contact with oils or reagents).

Installation of polyurethane parts is often carried out using standard mounting locations, bolts, flanges, or by gluing/casting onto a metal base. For lining equipment (bunkers, chutes, gravity equipment), it is important to properly prepare the surface for adhesion and follow the casting technology to ensure long-term operation. The plant's engineers provide installation and service consultations.

Read more about material properties, typical technologies, and application areas in the [reference information](/informatsiya), and for calculation and ordering, visit the [contacts page](/contacts).

## Conclusion: Why Polyurethane Is a Universal Solution for Industrial Parts
TIMOL polyurethane is a material that combines wear resistance 10 times higher than rubber, a wide range of hardness (50 Shore A to 70 Shore D), stability in the temperature range of -60...+100 °C, high strength, and elasticity. This makes polyurethane the ideal choice for critical assemblies in 12 industries, from mining to food. If you are looking for solutions to increase component lifespan, reduce downtime, and optimize operating costs, contact TIMOL for material selection, calculation, and manufacturing of parts according to your drawings. [Contact us here](/contacts).
